Brake Cleaner is a powerful quick-drying cleaner for brake and clutch parts.
Description
- Cleans and degreases
- Leaves no residue
- Quick-drying
- Non-corrosive to metals
- Prevents beeping noises
- Spray can be used at an angle of 360°
Applications
- Quickly removes excess brake fluid, oil residue, dirt, etc.
- Prevents squeaky brakes and prevents clutch slippage
- Convenient to use at all angles and non-corrosive to metals
Technical data
- Base: solvent-based mixture
- Consistency: Liquid
- Density of mixed product: Approx. 0.69 g/ml
- Viscosity (Brookfield): 1 mPa.s
- Flash point: < 20 °C
- Acidity pH: Neutral
- Solubility in water: Insoluble
- Volatile Organic Compound (VOC): 97 %.
- Propellant: CO2 (carbon dioxide)
- Processing temperature: 5 °C ? 35 °C
Instructions for use
- Shake spray can well before use. Spray enough product onto areas to be cleaned, then allow to soak in for a few seconds. If necessary, then wipe clean with an absorbent cloth. In case of reinforced carbon contamination, repeat the operation. Do not use on rubber, plastics or painted parts. Test possible surface deterioration in advance. Ensure adequate ventilation during use.
Safety recommendations
Ensure good ventilation in the workplace. In case of possible eye contact, flush abundantly with water.
